Benutzer:Lyl: Unterschied zwischen den Versionen

Aus wiki.archlinux.de
Keine Bearbeitungszusammenfassung
K (→‎Inbetriebnahme: -Sy in -S gewandelt gemäß Diskussion hier: https://bbs.archlinux.de/viewtopic.php?id=17347)
 
(17 dazwischenliegende Versionen von einem anderen Benutzer werden nicht angezeigt)
Zeile 1: Zeile 1:
XMPP: lyl@jabber.ccc.de
Jabber: lyl@jabber.ccc.de


== Scripting ==
=== Übersicht ===
*[[Benutzer:Lyl#Backup|Backup]]: Script zum automatisierten Einhängen einer [[Festplatte_verschlüsseln#Crypto-Devices_anlegen|Verschlüsselten Festplatte]] und starten eines [[Backups]] mit hilfe von [[rsnapshot]].
*[[Benutzer:Lyl#rename-image-r|rename-image-r]]: Benennen von Bildern mit Ordnername und Aufnahmendatum im aktuellen Verzeichniss und allen Unterordnern (sofern Vorhanden). z.B: dsc_0001.jpg --> Gebrtstag-Max_2009-01-09_19-10-25-jpg
*[[Benutzer:Lyl#macchanger|macchanger]]: Daemon zum zuweisen einer zufälligen MAC-Addresse.


== ''' ''Geplante Artikel:'' ''' ==
=== Backup ===


Diese Artikel sind nur zur privaten Vorbereitung gedacht und nicht zur offiziellen Verwendung. Es fehlen möglicherweise Quellangaben. Wenn du Teile dieser Texte verwenden willsst, frage über Jabber (XMPP) bei mir nach (s. oben)! Ich werde dann gerne auskunft geben, welche Teile von mir selbst und welche von anderen Personen verfasst wurden.
Script zum automatisierten Einhängen einer [[Festplatte_verschlüsseln#Crypto-Devices_anlegen|Verschlüsselten Festplatte]] und starten eines [[Backups]] mit hilfe von [[rsnapshot]].


----
==== Inbetriebnahme ====


----
# Beispiel mit folgenden Variablen:
STATUSFILE=/root/script/backup.day
KEYFILE=backup/backup.key
BACKUPCLOSE=/root/script/backup-close


== Bluetooth GPS ==
pacman -S rsnapshot
mkdir /extbackup/
mkdir /mnt/keyfs/
mount /mnt/usbstick-auf-dem-das-passwort-gespeichert-wir /mnt/keyfs/
echo "passwort-für-externe-hdd" /mnt/keyfs/$KEYFILE
echo 0 > $STATUSFILE
 
# Konfigurieren von rsnapshot: http://www.rsnapshot.org/howto/
# anlegen des Backup-Scripts Inhalt
# anpassen der Konfiguration am Anfang des Backup-Scripts
# anlegen von $BACKUPCLOSE


Dieser Artikel berschreibt die verwendung von Bluetooth-GPS-Empfängern an hand eines "Garmin GPS 10" mit dem Programm "GPS-Drive".
==== Script ====


== Installieren der Programme ==
Inhalt des Backup-Scripts (./backup):


Um eine Verbindung mit einem Bluetooth-Gerät aufbauen zu können, muss ein zuerst der Bluetooth adapter am Computer installiert werden. Hierfür werden folgende Pakete Benötigt:
#!/bin/sh
 
########################################################################
##                                                                    ##
## Script to automate mounting crypted, external hdd and start backup ##
## using rsnapshot.                                                  ##
##                                                                    ##
## by lyl  25.10.2008 - 10.02.2009                          GPL v3    ##
##                                                                    ##
########################################################################
 
#
# rsnapshot is configured in /etc/rsnapshot.conf
# parameters given to this script will be forwarded to rsnapshot
# see `man rsnapshot` for mor information
#
# use cron or anacron to start backup automaticaly
#
# depends=('rsnapshot')
# optdepends=('anacron')
#
 
# filesystems
BACKUPFS=/dev/disk/by-id/usb-WDC_WD2500AB-1234567890-0\:0-part1
KEYFS=/dev/disk/by-id/usb-USB_DISK_USB_DISK_123456790-0\:0-part1
 
# files
STATUSFILE=/root/script/backup.day
KEYFILE=backup/backup.key
BACKUPCLOSE=/root/script/backup-close
 
# Number of hourly backups until more deep backups are made
DAYS=2
WEEKS=6
MONTHS=18
YEARS=90
 
# END OF CONFIG
 
#
# Mounting filesystems
#
echo "mounting filesystem containing the key-file..."
mount $KEYFS /mnt/keyfs/
 
echo "opening and mounting backup filesystem..."
cryptsetup luksOpen $BACKUPFS extbackup < /mnt/keyfs/$KEYFILE
mount /dev/mapper/extbackup /extbackup/
if (mount | grep -c "/dev/mapper/extbackup on /extbackup" > /dev/null)
then
        echo "done"
else
echo "fail"
/root/script/backup-close
exit 1
fi
 
#
# Start backing up
#
BACKUPNR=`cat $STATUSFILE`
echo "starting hourly backups (Nr. $BACKUPNR)..."
rsnapshot hourly $1
 
# calculation deepth
if (test $[$BACKUPNR % $DAYS] -eq 0); then
BACKUPDAY=1
else
BACKUPDAY=0
fi
 
if (test $[$BACKUPNR % $WEEKS] -eq 0); then
BACKUPDAY=2
fi
 
if (test $[$BACKUPNR % $MONTHS] -eq 0); then
BACKUPDAY=3
fi
 
if (test $[$BACKUPNR % $YEARS] -eq 0); then
BACKUPDAY=4
fi
 
if (test $BACKUPDAY -ge 1)
then
echo "done"
echo "creating daily backup..."
rsnapshot daily $1
if (test $BACKUPDAY -ge 2)
then
echo "done"
echo "creating weekly backup..."
rsnapshot weekly $1
if (test $BACKUPDAY -ge 3)
then
echo "done"
echo "creating monthly backups..."
rsnapshot monthly $1
if (test $BACKUPDAY -ge 4)
then
echo "done"
echo "creating yearly backups..."
rsnapshot yearly $1
fi
fi
fi
fi
echo `expr $BACKUPNR  + 1` > $STATUSFILE
echo "done"
$BACKUPCLOSE
exit $?


  # pacman -Sy bluez-utils bluez-libs dbus
Die Nummer das aktuellen Backups wird aus der Datei /root/script/backup.day ($STATUSFILE) gelesen:


1


----
Inhalt von /mnt/keyfs/backup/backup.key ($KEYFILE):


----
passwort-für-externe-hdd
 
Inhalt von /root/script/backup-close ($BACKUPCLOSE):
 
#!/bin/sh
ERRORCODE=0
echo "umounting key filesystem..."
umount /mnt/keyfs
 
echo "umounting backup filesystem..."
umount /dev/mapper/extbackup
 
echo "closing crypto device..."
cryptsetup luksClose extbackup
if (ls /dev/mapper | grep -c "extbackup" > /dev/null)
then
        echo "fail"
echo "if you have opened the backup-file-system, please close it and try again!"
ERRORCODE=1
else
if (ls /mnt/keyfs/ |grep -c "" > /dev/null)
then
echo "fail"
echo "if you have opened the key-file-system, please close it and try again!"
ERRORCODE=2
fi
echo "done"
fi
exit $ERRORCODE
 
=== rename-image-r ===
 
Benennen von Bildern mit Ordnername und Aufnahmendatum im aktuellen Verzeichniss und allen Unterordnern (sofern Vorhanden).
 
z.B: dsc_0001.jpg --> Gebrtstag-Max_2009-01-09_19-10-25-jpg
 
==== Inbetriebnahme ====
 
# Erstellen einer ausführbaren Datei mit folgendem Inhalt
 
==== Script ====
 
#!/bin/sh
 
#
# recrusive rename of *.jpg to JJJJ-MM-DD_HH-MM-SS.jpg
#
# by lyl 18.01.2009
#
# based on:
# $Id: iRename,v 1.1 2001/11/20 03:11:28 vijoy Exp vijoy $
# http://www.varp.net/photos/download.html
#
 
#
#CONFIG:
#
#text to write in front or after date
# "dir" - the directory-name the image is in
# "original" -  the original (current) name of the image (be careful when re-renameing)
front="dir"
end="original"
 
#seperators
# seperator: between JJJJ,MM,DD and HH,MM,SS
# seperatorddhh between DD,HH and $front,timestamp,$end if $front/$end contain "dir" or "original"
seperator="-"
seperatorddhh="_"
 
#overwrite config via parameters
  #not implemented jet...
 
# Cleanup and create input
echo "renaming files in `pwd`..."
ls --escape *.jpg *.JPG | while read imgname
do
  if [ "$imgname" != "" ];then
    if [ ! -f "$imgname" ]; then
        echo "$imgname not found."
        break
    fi
# Extracting image information
    info=`head "$imgname"| strings| \
    grep -e "19..:..:.. ..:..:.." -e "20..:..:.. ..:..:.." -e "21..:..:.. ..:..:.."`
    orgname=`echo $imgname| awk '{ print substr( $0, 0 , length($0) - 4 ) }'`
# Set name
    newname=`echo $info|cut -d ' ' -f 1`"$seperatorddhh"`echo $info|cut -d ' ' -f 2`
    newname=`echo $newname|sed s/:/"$seperator"/g`
   
    if [ "$front" == "dir" ]
    then
    newname=`echo ${PWD##*/}`"$seperatorddhh""$newname"
    else
if [ "$front" == "original" ]
then
newname=$orgname"$seperatorddhh"$newname
else
newname=$front$newname
fi
    fi
   
    if [ "$end" == "dir" ]
    then
    newname="$newname""$seperatorddhh"`echo ${PWD##*/}`".jpg"
    else
if [ "$end" == "original" ]
then
newname=$newname"$seperatorddhh"$orgname".jpg"
else
newname=$newname$end".jpg"
fi
    fi
 
# Rename only if valid newname
    if [ "X$newname" != "X++" ] && [ "$imgname" != "" ] && [ "$imgname" != "$newname" ]
    then
    mv -i "$imgname" "$newname"
    fi
  fi
done
 
# Do the smae for each subdirectory
ls -l --escape | grep '^d'|cut -d ':' -f 2- | cut -d ' ' -f 2-| while read imgsubdir
do
if [ "$imgsubdir" != "" ];then
cd "$imgsubdir"
if [ "`echo $0 |cut -b 1`" == "/" ]
then
echo $0
$0
else
../$0
fi
cd ..
fi
done
 
=== macchanger ===
Daemon zum zuweisen einer zufälligen MAC-Addresse.
 
==== Inbetriebnahme ====
 
# Erstellen der Datei /etc/rc.d/macchanger mit unten stehendem Inhalt
# Anpassen der Netzwerk-Adapter, falls andere als eth0 und wlan0 geändert werden sollen
# Eintragen in /etc/rc.configs vor network: DAEMONS(... macchanger network ...)
 
==== Script ====
#!/bin/bash
. /etc/rc.d/functions
case "$1" in
        start)
                stat_busy "Starting Network"
                error=0
 
                #change mac of eth0
                ifconfig eth0 down
                  macchanger -A eth0 > /dev/null
                  ifconfig eth0 up
 
                #change mac of wlan
                ifconfig wlan0 down
                  macchanger -A wmaster0 > /dev/null
                  macchanger -A wlan0 > /dev/null
                  ifconfig wlan0 up
 
                if [ $error -eq 0 ]; then
                        stat_done
                else
                        stat_fail
                fi
 
                ;;
        stop)
                stat_busy "I cant remember my old MAC-Addresses"
                stat_done
                ;;
        restart)
                $0 start
                ;;
        *)
                echo "usage: $0 {start|stop|restart}"
esac

Aktuelle Version vom 5. September 2010, 21:41 Uhr

Jabber: lyl@jabber.ccc.de

Scripting

Übersicht

  • Backup: Script zum automatisierten Einhängen einer Verschlüsselten Festplatte und starten eines Backups mit hilfe von rsnapshot.
  • rename-image-r: Benennen von Bildern mit Ordnername und Aufnahmendatum im aktuellen Verzeichniss und allen Unterordnern (sofern Vorhanden). z.B: dsc_0001.jpg --> Gebrtstag-Max_2009-01-09_19-10-25-jpg
  • macchanger: Daemon zum zuweisen einer zufälligen MAC-Addresse.

Backup

Script zum automatisierten Einhängen einer Verschlüsselten Festplatte und starten eines Backups mit hilfe von rsnapshot.

Inbetriebnahme

# Beispiel mit folgenden Variablen:
STATUSFILE=/root/script/backup.day
KEYFILE=backup/backup.key
BACKUPCLOSE=/root/script/backup-close
pacman -S rsnapshot
mkdir /extbackup/
mkdir /mnt/keyfs/
mount /mnt/usbstick-auf-dem-das-passwort-gespeichert-wir /mnt/keyfs/
echo "passwort-für-externe-hdd" /mnt/keyfs/$KEYFILE
echo 0 > $STATUSFILE
 
# Konfigurieren von rsnapshot: http://www.rsnapshot.org/howto/
# anlegen des Backup-Scripts Inhalt
# anpassen der Konfiguration am Anfang des Backup-Scripts
# anlegen von $BACKUPCLOSE

Script

Inhalt des Backup-Scripts (./backup):

#!/bin/sh
 
########################################################################
##                                                                    ##
## Script to automate mounting crypted, external hdd and start backup ##
## using rsnapshot.                                                   ##
##                                                                    ##
## by lyl  25.10.2008 - 10.02.2009                          GPL v3    ##
##                                                                    ##
########################################################################
 
#
# rsnapshot is configured in /etc/rsnapshot.conf
# parameters given to this script will be forwarded to rsnapshot
# see `man rsnapshot` for mor information
# 
# use cron or anacron to start backup automaticaly
#
# depends=('rsnapshot')
# optdepends=('anacron')
#
 
# filesystems
BACKUPFS=/dev/disk/by-id/usb-WDC_WD2500AB-1234567890-0\:0-part1
KEYFS=/dev/disk/by-id/usb-USB_DISK_USB_DISK_123456790-0\:0-part1
 
# files
STATUSFILE=/root/script/backup.day
KEYFILE=backup/backup.key
BACKUPCLOSE=/root/script/backup-close
 
# Number of hourly backups until more deep backups are made
DAYS=2
WEEKS=6
MONTHS=18
YEARS=90
 

# END OF CONFIG
 
#
# Mounting filesystems
#
echo "mounting filesystem containing the key-file..."
mount $KEYFS /mnt/keyfs/
 
echo "opening and mounting backup filesystem..."
cryptsetup luksOpen $BACKUPFS extbackup < /mnt/keyfs/$KEYFILE
mount /dev/mapper/extbackup /extbackup/
if (mount | grep -c "/dev/mapper/extbackup on /extbackup" > /dev/null)
then
       	echo "done"
else
	echo "fail"
	/root/script/backup-close
	exit 1
fi
 
#
# Start backing up
#
BACKUPNR=`cat $STATUSFILE`
echo "starting hourly backups (Nr. $BACKUPNR)..."
rsnapshot hourly $1
 
# calculation deepth
if (test $[$BACKUPNR % $DAYS] -eq 0); then
	BACKUPDAY=1
else
	BACKUPDAY=0
fi
 
if (test $[$BACKUPNR % $WEEKS] -eq 0); then
	BACKUPDAY=2
fi
 
if (test $[$BACKUPNR % $MONTHS] -eq 0); then
	BACKUPDAY=3
fi
 
if (test $[$BACKUPNR % $YEARS] -eq 0); then
	BACKUPDAY=4
fi
 

if (test $BACKUPDAY -ge 1)
then
	echo "done"
	echo "creating daily backup..."
	rsnapshot daily $1
	if (test $BACKUPDAY -ge 2)
	then
		echo "done"
		echo "creating weekly backup..."
		rsnapshot weekly $1
		if (test $BACKUPDAY -ge 3)
		then
			echo "done"
			echo "creating monthly backups..."
			rsnapshot monthly $1
			if (test $BACKUPDAY -ge 4)
			then
				echo "done"
				echo "creating yearly backups..."
				rsnapshot yearly $1
			fi
		fi
	fi
fi
echo `expr $BACKUPNR  + 1` > $STATUSFILE 
echo "done"
$BACKUPCLOSE
exit $?

Die Nummer das aktuellen Backups wird aus der Datei /root/script/backup.day ($STATUSFILE) gelesen:

1

Inhalt von /mnt/keyfs/backup/backup.key ($KEYFILE):

passwort-für-externe-hdd

Inhalt von /root/script/backup-close ($BACKUPCLOSE):

#!/bin/sh
ERRORCODE=0
echo "umounting key filesystem..."
umount /mnt/keyfs
 
echo "umounting backup filesystem..."
umount /dev/mapper/extbackup
 
echo "closing crypto device..."
cryptsetup luksClose extbackup
if (ls /dev/mapper | grep -c "extbackup" > /dev/null)
then
       	echo "fail"
	echo "if you have opened the backup-file-system, please close it and try again!"
	ERRORCODE=1
else
	if (ls /mnt/keyfs/ |grep -c "" > /dev/null)
	then
		echo "fail"
		echo "if you have opened the key-file-system, please close it and try again!"
		ERRORCODE=2
	fi
	echo "done"
fi
exit $ERRORCODE

rename-image-r

Benennen von Bildern mit Ordnername und Aufnahmendatum im aktuellen Verzeichniss und allen Unterordnern (sofern Vorhanden).

z.B: dsc_0001.jpg --> Gebrtstag-Max_2009-01-09_19-10-25-jpg

Inbetriebnahme

  1. Erstellen einer ausführbaren Datei mit folgendem Inhalt

Script

#!/bin/sh 
 
#
# recrusive rename of *.jpg to JJJJ-MM-DD_HH-MM-SS.jpg
#
# by lyl 18.01.2009
#
# based on:
# $Id: iRename,v 1.1 2001/11/20 03:11:28 vijoy Exp vijoy $
# http://www.varp.net/photos/download.html
# 
 
#
#CONFIG:
#
#text to write in front or after date
# "dir" - the directory-name the image is in
# "original" -  the original (current) name of the image (be careful when re-renameing)
front="dir"
end="original"
 
#seperators
# seperator: between JJJJ,MM,DD and HH,MM,SS
# seperatorddhh between DD,HH and $front,timestamp,$end if $front/$end contain "dir" or "original"
seperator="-"
seperatorddhh="_"
 
#overwrite config via parameters
 #not implemented jet...
 
# Cleanup and create input
echo "renaming files in `pwd`..."
ls --escape *.jpg *.JPG | while read imgname
do
  if [ "$imgname" != "" ];then
    if [ ! -f "$imgname" ]; then
        echo "$imgname not found."
        break
    fi
# Extracting image information
    info=`head "$imgname"| strings| \
    	grep -e "19..:..:.. ..:..:.." -e "20..:..:.. ..:..:.." -e "21..:..:.. ..:..:.."`
    orgname=`echo $imgname| awk '{ print substr( $0, 0 , length($0) - 4 ) }'`
# Set name
    newname=`echo $info|cut -d ' ' -f 1`"$seperatorddhh"`echo $info|cut -d ' ' -f 2`
    newname=`echo $newname|sed s/:/"$seperator"/g`
    
    if [ "$front" == "dir" ]
    then
	    newname=`echo ${PWD##*/}`"$seperatorddhh""$newname"
    else
	if [ "$front" == "original" ]
	then
		newname=$orgname"$seperatorddhh"$newname
	else
		newname=$front$newname
	fi
    fi
    
    if [ "$end" == "dir" ]
    then
	    newname="$newname""$seperatorddhh"`echo ${PWD##*/}`".jpg"
    else
	if [ "$end" == "original" ]
	then
		newname=$newname"$seperatorddhh"$orgname".jpg"
	else
		newname=$newname$end".jpg"
	fi
    fi
 
# Rename only if valid newname
    if [ "X$newname" != "X++" ] && [ "$imgname" != "" ] && [ "$imgname" != "$newname" ]
    then
    	mv -i "$imgname" "$newname"
    fi
  fi
done
 
# Do the smae for each subdirectory
ls -l --escape | grep '^d'|cut -d ':' -f 2- | cut -d ' ' -f 2-| while read imgsubdir
do
	if [ "$imgsubdir" != "" ];then
		cd "$imgsubdir"
		if [ "`echo $0 |cut -b 1`" == "/" ]
		then
			echo $0
			$0
		else
			../$0
		fi
		cd ..
	fi
done

macchanger

Daemon zum zuweisen einer zufälligen MAC-Addresse.

Inbetriebnahme

  1. Erstellen der Datei /etc/rc.d/macchanger mit unten stehendem Inhalt
  2. Anpassen der Netzwerk-Adapter, falls andere als eth0 und wlan0 geändert werden sollen
  3. Eintragen in /etc/rc.configs vor network: DAEMONS(... macchanger network ...)

Script

#!/bin/bash
. /etc/rc.d/functions
case "$1" in
        start)
                stat_busy "Starting Network"
                error=0
 
                #change mac of eth0
                ifconfig eth0 down
                 macchanger -A eth0 > /dev/null
                 ifconfig eth0 up
 
                #change mac of wlan
                ifconfig wlan0 down
                 macchanger -A wmaster0 > /dev/null
                 macchanger -A wlan0 > /dev/null
                 ifconfig wlan0 up
 
                if [ $error -eq 0 ]; then
                        stat_done
                else
                        stat_fail
                fi
 
                ;;
        stop)
                stat_busy "I cant remember my old MAC-Addresses"
                stat_done
                ;;
        restart)
                $0 start
                ;;
        *)
                echo "usage: $0 {start|stop|restart}"
esac