https://wiki.archlinux.de/api.php?action=feedcontributions&user=PMay&feedformat=atomwiki.archlinux.de - Benutzerbeiträge [de]2024-03-29T09:56:30ZBenutzerbeiträgeMediaWiki 1.41.0https://wiki.archlinux.de/index.php?title=Benutzer:PMay/Installierte_Pakete&diff=18346Benutzer:PMay/Installierte Pakete2015-03-16T12:18:26Z<p>PMay: </p>
<hr />
<div> virtualbox-archlinux-additions <-- ?<br />
pkgstats<br />
flashplugin<br />
archlinux-wallpaper<br />
vlc<br />
gnome-utils <-- ?<br />
gedit<br />
libvdpau<br />
libcups<br />
cups-pdf<br />
gutenprint<br />
chromium<br />
virtualbox<br />
abs<br />
file-roller<br />
unrar<br />
mplayer2<br />
gcalctool<br />
eog<br />
net-tools<br />
gvfs-smb</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/Installierte_Pakete&diff=18345Benutzer:PMay/Installierte Pakete2015-03-16T11:58:04Z<p>PMay: </p>
<hr />
<div> virtualbox-archlinux-additions <-- ?<br />
pkgstats<br />
flashplugin<br />
archlinux-wallpaper<br />
vlc<br />
gnome-utils <-- ?<br />
gedit<br />
libvdpau<br />
libcups<br />
cups-pdf<br />
gutenprint<br />
chromium<br />
virtualbox<br />
abs<br />
file-roller<br />
unrar<br />
mplayer2<br />
gcalctool<br />
eog<br />
net-tools</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/pacman&diff=17723Benutzer:PMay/pacman2014-05-22T09:06:02Z<p>PMay: /* Abfragen */</p>
<hr />
<div>== Update ==<br />
pacman -Syu<br />
<br />
== Abfragen ==<br />
<br />
=== Alle installierten offiziellen Pakete abfragen incl. Gruppe ===<br />
pacman -Qeng<br />
<br />
=== Alle installierten Pakete aus AUR abfragen ===<br />
pacman -Qm<br />
<br />
=== Gruppen der installierten Pakete abfragen ===<br />
xfce4-goodies<br />
<br />
== Löschen incl. nicht benötigter Abhängigkeiten ==<br />
pacman -Rs <paketname oder gruppe></div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/pacman&diff=17722Benutzer:PMay/pacman2014-05-22T09:01:34Z<p>PMay: /* Löschen */</p>
<hr />
<div>== Update ==<br />
pacman -Syu<br />
<br />
== Abfragen ==<br />
<br />
=== Alle installierten Pakete aus AUR abfragen ===<br />
pacman -Qm<br />
<br />
=== Gruppen der installierten Pakete abfragen ===<br />
xfce4-goodies<br />
<br />
== Löschen incl. nicht benötigter Abhängigkeiten ==<br />
pacman -Rs <paketname oder gruppe></div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/pacman&diff=17721Benutzer:PMay/pacman2014-05-22T09:00:54Z<p>PMay: </p>
<hr />
<div>== Update ==<br />
pacman -Syu<br />
<br />
== Abfragen ==<br />
<br />
=== Alle installierten Pakete aus AUR abfragen ===<br />
pacman -Qm<br />
<br />
=== Gruppen der installierten Pakete abfragen ===<br />
xfce4-goodies<br />
<br />
== Löschen ==<br />
pacman -Rs <paketname oder gruppe></div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/pacman&diff=17720Benutzer:PMay/pacman2014-05-22T08:40:43Z<p>PMay: /* = Alle installierten Pakete aus AUR abfragen */</p>
<hr />
<div>== Update ==<br />
pacman -Syu<br />
<br />
== Abfragen ==<br />
<br />
=== Alle installierten Pakete aus AUR abfragen ===<br />
pacman -Qm</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/pacman&diff=17719Benutzer:PMay/pacman2014-05-22T08:40:34Z<p>PMay: Die Seite wurde neu angelegt: „== Update == pacman -Syu == Abfragen == === Alle installierten Pakete aus AUR abfragen == pacman -Qm“</p>
<hr />
<div>== Update ==<br />
pacman -Syu<br />
<br />
== Abfragen ==<br />
<br />
=== Alle installierten Pakete aus AUR abfragen ==<br />
pacman -Qm</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay&diff=17718Benutzer:PMay2014-05-22T08:39:16Z<p>PMay: /* Unterseiten */</p>
<hr />
<div>== [[/Lesezeichen|Lesezeichen]] ==<br />
{{/Lesezeichen}}<br />
<br />
== Unterseiten ==<br />
* [[/pacman]]<br />
* [[/Konfiguration]]<br />
* [[/Installierte Pakete]]<br />
* [[/PKGBUILD]]<br />
* [[/T430s Setup]]<br />
* [[/vServer at Hetzner]]<br />
* [[/T430s Setup alt]]<br />
* [[/MPlayer]]<br />
* [[/Regionalcode (region code) von DVD Laufwerken setzen]]<br />
* [[/rubyripper]]<br />
* tar <br />
* rdiff rsync<br />
* rsnc cryptio<br />
<br />
== Fertige Eigene Seiten ==<br />
* [[Garmin GPS mit QLandkarte GT]] -> eventuelle Kategorien anders strukturieren<br />
* [[Drucken mit Canon MX (PIXMA, 850, etc.)]] -> eventuelle Kategorien anders strukturieren<br />
<br />
== [[/Bilder-Galerie|Bilder-Galerie]] ==<br />
{{/Bilder-Galerie}}<br />
<br />
== Löschen ==<br />
* [[/Garmin GPS]]<br />
* [[T430s Setup]]<br />
* [[/Garmin GPS mit QLandkarte GT]]<br />
* [[/Drucken mit Canon MX (850, etc.)]]<br />
* [[Benutzer:Drucken mit Canon MX (PIXMA, 850, etc.)]]<br />
* [[/Pacman]]<br />
* [[/GNOME config]]</div>PMayhttps://wiki.archlinux.de/index.php?title=Drucken_mit_Canon_MX_(PIXMA,_850,_etc.)&diff=17356Drucken mit Canon MX (PIXMA, 850, etc.)2014-01-09T14:33:40Z<p>PMay: /* BJNP testen */</p>
<hr />
<div>Anleitung wie man mit dem Canon MX850 (und vermutlich noch vielen weiteren Canon Druckern) drucken kann. Bei diesem Drucker handelt es sich um einen Multiunktionsgerät was als Netzwerkdrucker verwendet werden kann. Als Protokoll kommt ein proprietäres USB über IP Protokoll von Canon zum Einsatz.<br />
<br />
== Installation der Software ==<br />
* zunächst sollte man CUPS installieren (Paketname: cups)<br />
* Das proprietäre USB über IP Protokoll von Canon wird durch die Software namens [http://sourceforge.net/projects/cups-bjnp/ cups-bjnp] unterstützt. Dieses muss als nächstes aus dem AUR installiert werden: {{AUR|cups-bjnp}} <br />
* nun das Paket gutenprint installieren<br />
<br />
== BJNP testen ==<br />
BJNP kann man nun mit folgendem Befeh testen. Das funktioniert nur wenn der Drucker im gleichen Subnet ist wie der eigene Rechner. Der Drucker muss an sein und keine Firewall darf tcp/udp Port 8611 blockieren.<br />
<br />
/usr/lib/cups/backend/bjnp<br />
<br />
Die Ausgabe sollte ungefähr so aussehen:<br />
<br />
network bjnp://192.168.1.117:8611 "Canon MX850 series" "Canon MX850 series 192.168.1.117" <br />
"MFG:Canon;CMD:BJL,BJRaster3,BSCCe,NCCe,PLI;SOJ:TXT01,BJNP2;MDL:MX850 series;CLS:PRINTER;<br />
DES:Canon MX850 series;VER:1.060;STA:10;FSI:07;HRI:OTH;MSI:DAT,E3;"<br />
<br />
== CUPS starten ==<br />
Nun sollte der CUPS-Server gestartet werden.<br />
<br />
systemctl start cups<br />
<br />
Den CUPS-server Service automatisch beim nächsten Neustart starten.<br />
<br />
systemctl enable cups<br />
<br />
== Drucker in CUPS konfigurieren ==<br />
[[Datei:BJNP-Drucker-hinzufuegen-01.png|400px|thumb|right|Drucker in CUPS konfigurieren: den Drucker auswählen]]<br />
[[Datei:BJNP-Drucker-hinzufuegen-02.png|400px|thumb|right|Drucker in CUPS konfigurieren: das Model auswählen]]<br />
[[Datei:BJNP-Drucker-hinzufuegen-03.png|400px|thumb|right|Drucker in CUPS konfigurieren: default Options setzen (A4 statt letter) etc.]]<br />
* Cups per http://localhost:631/ aufrufen<br />
* Administration klicken<br />
* Add Printer klicken<br />
* als root anmelden<br />
* den Drucker auswählen (siehe Screenshot)<br />
* zwei mal Continue klicken<br />
* nun das Model auswählen (siehe Screenshot)<br />
* nun die default Options setzen (A4 statt letter) etc. (siehe Screenshot)<br />
* das ganze sperichern<br />
<br />
== Drucker mit denen BJNP funktioniert ==<br />
Diese Liste nach erfolgreicher Installation bitte ergänzen.<br />
* Canon MX850 - getestet von --[[Benutzer:PMay|PMay]] ([[Benutzer Diskussion:PMay|Diskussion]]) 19:58, 11. Sep. 2012 (CEST)<br />
* Canon Pixma MG5350 - getestet von nichtangemeldetem Nutzer -- 10. April 2013<br />
<br />
== Fehlerbehebung ==<br />
<br />
=== BJNP findet den Drucker nicht ===<br />
Ursache kann sein, dass der Drucker nicht eingeschaltet ist. Eventuell liegt es aber auch daran, dass die IP des Druckers und des Computers nicht im gleichen Subnetz sind. Wenn zum Beispiel die IP des Computers 192.168.1.40 ist und die des Druckers 192.168.1.89 dann ist alles ok. Wenn aber zum Beispiel die IP des Computers 192.168.1.40 ist und die des Druckers 192.168.2.89 dann wird es nicht funktionieren.<br />
<br />
[[Kategorie:Hardware]]<br />
[[Kategorie:Installation]]<br />
[[Kategorie:Konfiguration]]<br />
<br />
== Weblinks ==<br />
* [http://cups-bjnp.sourceforge.net/ cups-bjnp Webseite] {{sprache|en}}<br />
* [http://sourceforge.net/projects/cups-bjnp/ cups-bjnp auf Sourceforge] {{sprache|en}}<br />
* [http://projects.nikenglund.com/Printing_to_Canon_MX850_via_network_with_Ubuntu Printing to Canon MX850 via network with Ubuntu ] {{sprache|en}}</div>PMayhttps://wiki.archlinux.de/index.php?title=Drucken_mit_Canon_MX_(PIXMA,_850,_etc.)&diff=17346Drucken mit Canon MX (PIXMA, 850, etc.)2014-01-05T19:17:11Z<p>PMay: /* BJNP testen */</p>
<hr />
<div>Anleitung wie man mit dem Canon MX850 (und vermutlich noch vielen weiteren Canon Druckern) drucken kann. Bei diesem Drucker handelt es sich um einen Multiunktionsgerät was als Netzwerkdrucker verwendet werden kann. Als Protokoll kommt ein proprietäres USB über IP Protokoll von Canon zum Einsatz.<br />
<br />
== Installation der Software ==<br />
* zunächst sollte man CUPS installieren (Paketname: cups)<br />
* Das proprietäre USB über IP Protokoll von Canon wird durch die Software namens [http://sourceforge.net/projects/cups-bjnp/ cups-bjnp] unterstützt. Dieses muss als nächstes aus dem AUR installiert werden: {{AUR|cups-bjnp}} <br />
* nun das Paket gutenprint installieren<br />
<br />
== BJNP testen ==<br />
BJNP kann man nun mit folgendem Befeh testen. Das funktioniert nur wenn der Drucker im gleichen Subnet ist die der eigene Rechner, der Drucken an ist and keine Firewall da ist due tcp/udp Port 8611 blockiert.<br />
<br />
/usr/lib/cups/backend/bjnp<br />
<br />
Die Ausgabe sollte ungefähr so aussehen:<br />
<br />
network bjnp://192.168.1.117:8611 "Canon MX850 series" "Canon MX850 series 192.168.1.117" <br />
"MFG:Canon;CMD:BJL,BJRaster3,BSCCe,NCCe,PLI;SOJ:TXT01,BJNP2;MDL:MX850 series;CLS:PRINTER;<br />
DES:Canon MX850 series;VER:1.060;STA:10;FSI:07;HRI:OTH;MSI:DAT,E3;"<br />
<br />
== CUPS starten ==<br />
Nun sollte der CUPS-Server gestartet werden.<br />
<br />
systemctl start cups<br />
<br />
Den CUPS-server Service automatisch beim nächsten Neustart starten.<br />
<br />
systemctl enable cups<br />
<br />
== Drucker in CUPS konfigurieren ==<br />
[[Datei:BJNP-Drucker-hinzufuegen-01.png|400px|thumb|right|Drucker in CUPS konfigurieren: den Drucker auswählen]]<br />
[[Datei:BJNP-Drucker-hinzufuegen-02.png|400px|thumb|right|Drucker in CUPS konfigurieren: das Model auswählen]]<br />
[[Datei:BJNP-Drucker-hinzufuegen-03.png|400px|thumb|right|Drucker in CUPS konfigurieren: default Options setzen (A4 statt letter) etc.]]<br />
* Cups per http://localhost:631/ aufrufen<br />
* Administration klicken<br />
* Add Printer klicken<br />
* als root anmelden<br />
* den Drucker auswählen (siehe Screenshot)<br />
* zwei mal Continue klicken<br />
* nun das Model auswählen (siehe Screenshot)<br />
* nun die default Options setzen (A4 statt letter) etc. (siehe Screenshot)<br />
* das ganze sperichern<br />
<br />
== Drucker mit denen BJNP funktioniert ==<br />
Diese Liste nach erfolgreicher Installation bitte ergänzen.<br />
* Canon MX850 - getestet von --[[Benutzer:PMay|PMay]] ([[Benutzer Diskussion:PMay|Diskussion]]) 19:58, 11. Sep. 2012 (CEST)<br />
* Canon Pixma MG5350 - getestet von nichtangemeldetem Nutzer -- 10. April 2013<br />
<br />
== Fehlerbehebung ==<br />
<br />
=== BJNP findet den Drucker nicht ===<br />
Ursache kann sein, dass der Drucker nicht eingeschaltet ist. Eventuell liegt es aber auch daran, dass die IP des Druckers und des Computers nicht im gleichen Subnetz sind. Wenn zum Beispiel die IP des Computers 192.168.1.40 ist und die des Druckers 192.168.1.89 dann ist alles ok. Wenn aber zum Beispiel die IP des Computers 192.168.1.40 ist und die des Druckers 192.168.2.89 dann wird es nicht funktionieren.<br />
<br />
[[Kategorie:Hardware]]<br />
[[Kategorie:Installation]]<br />
[[Kategorie:Konfiguration]]<br />
<br />
== Weblinks ==<br />
* [http://cups-bjnp.sourceforge.net/ cups-bjnp Webseite] {{sprache|en}}<br />
* [http://sourceforge.net/projects/cups-bjnp/ cups-bjnp auf Sourceforge] {{sprache|en}}<br />
* [http://projects.nikenglund.com/Printing_to_Canon_MX850_via_network_with_Ubuntu Printing to Canon MX850 via network with Ubuntu ] {{sprache|en}}</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17266Benutzer:PMay/T430s Setup2013-12-07T11:57:45Z<p>PMay: /* Netzwerk nach Neustart wieder aktivieren */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
# Festplatte partitionieren<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
# Filesystem anlegen<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
<br />
# mounten<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
#Mirror auswählen<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
# Anpassungen sollte nicht notwendig sein wenn man nicht mit Verschüsselung arbeitet<br />
# eventuell erste Zeile trotzdem rein, aber an hooks nichts ändern<br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
* create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
# nicht notwendig wenn man ohne dateisystemverschlüsselung arbeitet<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
* Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@<interface_name>.service<br />
<br />
* use this command to list all available interface names:<br />
<br />
# ip link<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay&diff=17265Benutzer:PMay2013-12-06T18:13:21Z<p>PMay: /* Unterseiten */</p>
<hr />
<div>== [[/Lesezeichen|Lesezeichen]] ==<br />
{{/Lesezeichen}}<br />
<br />
== Unterseiten ==<br />
* [[/Konfiguration]]<br />
* [[/Installierte Pakete]]<br />
* [[/PKGBUILD]]<br />
* [[/T430s Setup]]<br />
* [[/vServer at Hetzner]]<br />
* [[/T430s Setup alt]]<br />
* [[/MPlayer]]<br />
* [[/Regionalcode (region code) von DVD Laufwerken setzen]]<br />
* [[/rubyripper]]<br />
* tar <br />
* rdiff rsync<br />
* rsnc cryptio<br />
<br />
== Fertige Eigene Seiten ==<br />
* [[Garmin GPS mit QLandkarte GT]] -> eventuelle Kategorien anders strukturieren<br />
* [[Drucken mit Canon MX (PIXMA, 850, etc.)]] -> eventuelle Kategorien anders strukturieren<br />
<br />
== [[/Bilder-Galerie|Bilder-Galerie]] ==<br />
{{/Bilder-Galerie}}<br />
<br />
== Löschen ==<br />
* [[/Garmin GPS]]<br />
* [[T430s Setup]]<br />
* [[/Garmin GPS mit QLandkarte GT]]<br />
* [[/Drucken mit Canon MX (850, etc.)]]<br />
* [[Benutzer:Drucken mit Canon MX (PIXMA, 850, etc.)]]<br />
* [[/Pacman]]<br />
* [[/GNOME config]]</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay&diff=17264Benutzer:PMay2013-12-06T18:12:29Z<p>PMay: /* Unterseiten */</p>
<hr />
<div>== [[/Lesezeichen|Lesezeichen]] ==<br />
{{/Lesezeichen}}<br />
<br />
== Unterseiten ==<br />
* [[/Konfiguration]]<br />
* [[/Installierte Pakete]]<br />
* [[/PKGBUILD]]<br />
* [[/T430s Setup]]<br />
* [[/vServer at Hetzner]]<br />
* [[/T430s Setup alt]]<br />
* [[/MPlayer]]<br />
* [[/Regionalcode (region code) von DVD Laufwerken setzen]]<br />
* [[/rubyripper]]<br />
* tar <br />
* rdiff rsync<br />
<br />
== Fertige Eigene Seiten ==<br />
* [[Garmin GPS mit QLandkarte GT]] -> eventuelle Kategorien anders strukturieren<br />
* [[Drucken mit Canon MX (PIXMA, 850, etc.)]] -> eventuelle Kategorien anders strukturieren<br />
<br />
== [[/Bilder-Galerie|Bilder-Galerie]] ==<br />
{{/Bilder-Galerie}}<br />
<br />
== Löschen ==<br />
* [[/Garmin GPS]]<br />
* [[T430s Setup]]<br />
* [[/Garmin GPS mit QLandkarte GT]]<br />
* [[/Drucken mit Canon MX (850, etc.)]]<br />
* [[Benutzer:Drucken mit Canon MX (PIXMA, 850, etc.)]]<br />
* [[/Pacman]]<br />
* [[/GNOME config]]</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17237Benutzer:PMay/vServer at Hetzner2013-11-21T18:51:54Z<p>PMay: Weiterleitung nach en:Hetzner.de vServer Setup erstellt</p>
<hr />
<div>#REDIRECT [[:en:Hetzner.de vServer Setup]]</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17232Benutzer:PMay/vServer at Hetzner2013-11-20T20:00:23Z<p>PMay: /* Idears */</p>
<hr />
<div>== more packages to install ==<br />
# pacman -S net-tools<br />
<br />
== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0<br />
<br />
== LAMP ==<br />
# pacman -S apache php php-apache mariadb<br />
<br />
<nowiki>Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...<br />
OK<br />
Filling help tables...<br />
OK<br />
<br />
To start mysqld at boot time you have to copy<br />
support-files/mysql.server to the right place for your system<br />
<br />
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !<br />
To do so, start the server, then issue the following commands:<br />
<br />
'/usr/bin/mysqladmin' -u root password 'new-password'<br />
'/usr/bin/mysqladmin' -u root -h eniac password 'new-password'<br />
<br />
Alternatively you can run:<br />
'/usr/bin/mysql_secure_installation'<br />
<br />
which will also give you the option of removing the test<br />
databases and anonymous user created by default. This is<br />
strongly recommended for production servers.<br />
<br />
See the MariaDB Knowledgebase at http://kb.askmonty.org or the<br />
MySQL manual for more instructions.<br />
<br />
You can start the MariaDB daemon with:<br />
cd '/usr' ; /usr/bin/mysqld_safe --datadir='/var/lib/mysql'<br />
<br />
You can test the MariaDB daemon with mysql-test-run.pl<br />
cd '/usr/mysql-test' ; perl mysql-test-run.pl<br />
<br />
Please report any problems with the '/usr/scripts/mysqlbug' script!<br />
<br />
The latest information about MariaDB is available at http://mariadb.org/.<br />
You can find additional information about the MySQL part at:<br />
http://dev.mysql.com<br />
Support MariaDB development by buying support/new features from<br />
Monty Program Ab. You can contact us about this at sales@montyprogram.com.<br />
Alternatively consider joining our community based development effort:<br />
http://kb.askmonty.org/en/contributing-to-the-mariadb-project/<br />
<br />
>> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'<br />
after mysqld.service restart.</nowiki><br />
<br />
== MariaDB ==<br />
<br />
* login to DB<br />
<br />
# mysql -u root -p<br />
<br />
CREATE USER 'wp'@'localhost' IDENTIFIED BY 'somepassword';<br />
CREATE DATABASE wp_db;<br />
GRANT ALL PRIVILEGES ON wp_db.* TO 'wp'@'localhost';<br />
<br />
== Idears ==<br />
* use btrfs to make snapshots for recovery - but use ro now rw snapshots (tip from irc - whatever that means)<br />
* port 5060 (sip) scheint offen zu sein<br />
<br />
# netstat -tuple<br />
# ss -l</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17231Benutzer:PMay/vServer at Hetzner2013-11-20T19:54:16Z<p>PMay: /* Idears */</p>
<hr />
<div>== more packages to install ==<br />
# pacman -S net-tools<br />
<br />
== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0<br />
<br />
== LAMP ==<br />
# pacman -S apache php php-apache mariadb<br />
<br />
<nowiki>Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...<br />
OK<br />
Filling help tables...<br />
OK<br />
<br />
To start mysqld at boot time you have to copy<br />
support-files/mysql.server to the right place for your system<br />
<br />
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !<br />
To do so, start the server, then issue the following commands:<br />
<br />
'/usr/bin/mysqladmin' -u root password 'new-password'<br />
'/usr/bin/mysqladmin' -u root -h eniac password 'new-password'<br />
<br />
Alternatively you can run:<br />
'/usr/bin/mysql_secure_installation'<br />
<br />
which will also give you the option of removing the test<br />
databases and anonymous user created by default. This is<br />
strongly recommended for production servers.<br />
<br />
See the MariaDB Knowledgebase at http://kb.askmonty.org or the<br />
MySQL manual for more instructions.<br />
<br />
You can start the MariaDB daemon with:<br />
cd '/usr' ; /usr/bin/mysqld_safe --datadir='/var/lib/mysql'<br />
<br />
You can test the MariaDB daemon with mysql-test-run.pl<br />
cd '/usr/mysql-test' ; perl mysql-test-run.pl<br />
<br />
Please report any problems with the '/usr/scripts/mysqlbug' script!<br />
<br />
The latest information about MariaDB is available at http://mariadb.org/.<br />
You can find additional information about the MySQL part at:<br />
http://dev.mysql.com<br />
Support MariaDB development by buying support/new features from<br />
Monty Program Ab. You can contact us about this at sales@montyprogram.com.<br />
Alternatively consider joining our community based development effort:<br />
http://kb.askmonty.org/en/contributing-to-the-mariadb-project/<br />
<br />
>> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'<br />
after mysqld.service restart.</nowiki><br />
<br />
== MariaDB ==<br />
<br />
* login to DB<br />
<br />
# mysql -u root -p<br />
<br />
CREATE USER 'wp'@'localhost' IDENTIFIED BY 'somepassword';<br />
CREATE DATABASE wp_db;<br />
GRANT ALL PRIVILEGES ON wp_db.* TO 'wp'@'localhost';<br />
<br />
== Idears ==<br />
* use btrfs to make snapshots for recovery - but use ro now rw snapshots (tip from irc - whatever that means)<br />
* port 5060 (sip) scheint offen zu sein</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17230Benutzer:PMay/vServer at Hetzner2013-11-20T19:45:46Z<p>PMay: </p>
<hr />
<div>== more packages to install ==<br />
# pacman -S net-tools<br />
<br />
== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0<br />
<br />
== LAMP ==<br />
# pacman -S apache php php-apache mariadb<br />
<br />
<nowiki>Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...<br />
OK<br />
Filling help tables...<br />
OK<br />
<br />
To start mysqld at boot time you have to copy<br />
support-files/mysql.server to the right place for your system<br />
<br />
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !<br />
To do so, start the server, then issue the following commands:<br />
<br />
'/usr/bin/mysqladmin' -u root password 'new-password'<br />
'/usr/bin/mysqladmin' -u root -h eniac password 'new-password'<br />
<br />
Alternatively you can run:<br />
'/usr/bin/mysql_secure_installation'<br />
<br />
which will also give you the option of removing the test<br />
databases and anonymous user created by default. This is<br />
strongly recommended for production servers.<br />
<br />
See the MariaDB Knowledgebase at http://kb.askmonty.org or the<br />
MySQL manual for more instructions.<br />
<br />
You can start the MariaDB daemon with:<br />
cd '/usr' ; /usr/bin/mysqld_safe --datadir='/var/lib/mysql'<br />
<br />
You can test the MariaDB daemon with mysql-test-run.pl<br />
cd '/usr/mysql-test' ; perl mysql-test-run.pl<br />
<br />
Please report any problems with the '/usr/scripts/mysqlbug' script!<br />
<br />
The latest information about MariaDB is available at http://mariadb.org/.<br />
You can find additional information about the MySQL part at:<br />
http://dev.mysql.com<br />
Support MariaDB development by buying support/new features from<br />
Monty Program Ab. You can contact us about this at sales@montyprogram.com.<br />
Alternatively consider joining our community based development effort:<br />
http://kb.askmonty.org/en/contributing-to-the-mariadb-project/<br />
<br />
>> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'<br />
after mysqld.service restart.</nowiki><br />
<br />
== MariaDB ==<br />
<br />
* login to DB<br />
<br />
# mysql -u root -p<br />
<br />
CREATE USER 'wp'@'localhost' IDENTIFIED BY 'somepassword';<br />
CREATE DATABASE wp_db;<br />
GRANT ALL PRIVILEGES ON wp_db.* TO 'wp'@'localhost';<br />
<br />
== Idears ==<br />
* use btrfs to make snapshots for recovery - but use ro now rw snapshots (tip from irc - whatever that means)</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17228Benutzer:PMay/vServer at Hetzner2013-11-20T11:11:19Z<p>PMay: </p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0<br />
<br />
== LAMP ==<br />
# pacman -S apache php php-apache mariadb<br />
<br />
<nowiki>Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...<br />
OK<br />
Filling help tables...<br />
OK<br />
<br />
To start mysqld at boot time you have to copy<br />
support-files/mysql.server to the right place for your system<br />
<br />
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !<br />
To do so, start the server, then issue the following commands:<br />
<br />
'/usr/bin/mysqladmin' -u root password 'new-password'<br />
'/usr/bin/mysqladmin' -u root -h eniac password 'new-password'<br />
<br />
Alternatively you can run:<br />
'/usr/bin/mysql_secure_installation'<br />
<br />
which will also give you the option of removing the test<br />
databases and anonymous user created by default. This is<br />
strongly recommended for production servers.<br />
<br />
See the MariaDB Knowledgebase at http://kb.askmonty.org or the<br />
MySQL manual for more instructions.<br />
<br />
You can start the MariaDB daemon with:<br />
cd '/usr' ; /usr/bin/mysqld_safe --datadir='/var/lib/mysql'<br />
<br />
You can test the MariaDB daemon with mysql-test-run.pl<br />
cd '/usr/mysql-test' ; perl mysql-test-run.pl<br />
<br />
Please report any problems with the '/usr/scripts/mysqlbug' script!<br />
<br />
The latest information about MariaDB is available at http://mariadb.org/.<br />
You can find additional information about the MySQL part at:<br />
http://dev.mysql.com<br />
Support MariaDB development by buying support/new features from<br />
Monty Program Ab. You can contact us about this at sales@montyprogram.com.<br />
Alternatively consider joining our community based development effort:<br />
http://kb.askmonty.org/en/contributing-to-the-mariadb-project/<br />
<br />
>> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'<br />
after mysqld.service restart.</nowiki><br />
<br />
== MariaDB ==<br />
<br />
* login to DB<br />
<br />
# mysql -u root -p<br />
<br />
CREATE USER 'wp'@'localhost' IDENTIFIED BY 'somepassword';<br />
CREATE DATABASE wp_db;<br />
GRANT ALL PRIVILEGES ON wp_db.* TO 'wp'@'localhost';<br />
<br />
== Idears ==<br />
* use btrfs to make snapshots for recovery - but use ro now rw snapshots (tip from irc - whatever that means)</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17227Benutzer:PMay/vServer at Hetzner2013-11-20T10:05:01Z<p>PMay: /* MariaDB */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0<br />
<br />
== LAMP ==<br />
# pacman -S apache php php-apache mariadb<br />
<br />
<nowiki>Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...<br />
OK<br />
Filling help tables...<br />
OK<br />
<br />
To start mysqld at boot time you have to copy<br />
support-files/mysql.server to the right place for your system<br />
<br />
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !<br />
To do so, start the server, then issue the following commands:<br />
<br />
'/usr/bin/mysqladmin' -u root password 'new-password'<br />
'/usr/bin/mysqladmin' -u root -h eniac password 'new-password'<br />
<br />
Alternatively you can run:<br />
'/usr/bin/mysql_secure_installation'<br />
<br />
which will also give you the option of removing the test<br />
databases and anonymous user created by default. This is<br />
strongly recommended for production servers.<br />
<br />
See the MariaDB Knowledgebase at http://kb.askmonty.org or the<br />
MySQL manual for more instructions.<br />
<br />
You can start the MariaDB daemon with:<br />
cd '/usr' ; /usr/bin/mysqld_safe --datadir='/var/lib/mysql'<br />
<br />
You can test the MariaDB daemon with mysql-test-run.pl<br />
cd '/usr/mysql-test' ; perl mysql-test-run.pl<br />
<br />
Please report any problems with the '/usr/scripts/mysqlbug' script!<br />
<br />
The latest information about MariaDB is available at http://mariadb.org/.<br />
You can find additional information about the MySQL part at:<br />
http://dev.mysql.com<br />
Support MariaDB development by buying support/new features from<br />
Monty Program Ab. You can contact us about this at sales@montyprogram.com.<br />
Alternatively consider joining our community based development effort:<br />
http://kb.askmonty.org/en/contributing-to-the-mariadb-project/<br />
<br />
>> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'<br />
after mysqld.service restart.</nowiki><br />
<br />
== MariaDB ==<br />
<br />
* login to DB<br />
<br />
# mysql -u root -p<br />
<br />
CREATE USER 'wp'@'localhost' IDENTIFIED BY 'somepassword';<br />
CREATE DATABASE wp_db;<br />
GRANT ALL PRIVILEGES ON wp_db.* TO 'wp'@'localhost';</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17226Benutzer:PMay/vServer at Hetzner2013-11-20T09:59:49Z<p>PMay: /* MariaDB */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0<br />
<br />
== LAMP ==<br />
# pacman -S apache php php-apache mariadb<br />
<br />
<nowiki>Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...<br />
OK<br />
Filling help tables...<br />
OK<br />
<br />
To start mysqld at boot time you have to copy<br />
support-files/mysql.server to the right place for your system<br />
<br />
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !<br />
To do so, start the server, then issue the following commands:<br />
<br />
'/usr/bin/mysqladmin' -u root password 'new-password'<br />
'/usr/bin/mysqladmin' -u root -h eniac password 'new-password'<br />
<br />
Alternatively you can run:<br />
'/usr/bin/mysql_secure_installation'<br />
<br />
which will also give you the option of removing the test<br />
databases and anonymous user created by default. This is<br />
strongly recommended for production servers.<br />
<br />
See the MariaDB Knowledgebase at http://kb.askmonty.org or the<br />
MySQL manual for more instructions.<br />
<br />
You can start the MariaDB daemon with:<br />
cd '/usr' ; /usr/bin/mysqld_safe --datadir='/var/lib/mysql'<br />
<br />
You can test the MariaDB daemon with mysql-test-run.pl<br />
cd '/usr/mysql-test' ; perl mysql-test-run.pl<br />
<br />
Please report any problems with the '/usr/scripts/mysqlbug' script!<br />
<br />
The latest information about MariaDB is available at http://mariadb.org/.<br />
You can find additional information about the MySQL part at:<br />
http://dev.mysql.com<br />
Support MariaDB development by buying support/new features from<br />
Monty Program Ab. You can contact us about this at sales@montyprogram.com.<br />
Alternatively consider joining our community based development effort:<br />
http://kb.askmonty.org/en/contributing-to-the-mariadb-project/<br />
<br />
>> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'<br />
after mysqld.service restart.</nowiki><br />
<br />
== MariaDB ==<br />
<br />
* login to DB<br />
<br />
# mysql -u root -p<br />
<br />
CREATE USER 'wp'@'localhost' IDENTIFIED BY 'somepassword';<br />
CREATE DATABASE wp_db;</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17225Benutzer:PMay/vServer at Hetzner2013-11-20T09:58:52Z<p>PMay: /* MariaDB */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0<br />
<br />
== LAMP ==<br />
# pacman -S apache php php-apache mariadb<br />
<br />
<nowiki>Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...<br />
OK<br />
Filling help tables...<br />
OK<br />
<br />
To start mysqld at boot time you have to copy<br />
support-files/mysql.server to the right place for your system<br />
<br />
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !<br />
To do so, start the server, then issue the following commands:<br />
<br />
'/usr/bin/mysqladmin' -u root password 'new-password'<br />
'/usr/bin/mysqladmin' -u root -h eniac password 'new-password'<br />
<br />
Alternatively you can run:<br />
'/usr/bin/mysql_secure_installation'<br />
<br />
which will also give you the option of removing the test<br />
databases and anonymous user created by default. This is<br />
strongly recommended for production servers.<br />
<br />
See the MariaDB Knowledgebase at http://kb.askmonty.org or the<br />
MySQL manual for more instructions.<br />
<br />
You can start the MariaDB daemon with:<br />
cd '/usr' ; /usr/bin/mysqld_safe --datadir='/var/lib/mysql'<br />
<br />
You can test the MariaDB daemon with mysql-test-run.pl<br />
cd '/usr/mysql-test' ; perl mysql-test-run.pl<br />
<br />
Please report any problems with the '/usr/scripts/mysqlbug' script!<br />
<br />
The latest information about MariaDB is available at http://mariadb.org/.<br />
You can find additional information about the MySQL part at:<br />
http://dev.mysql.com<br />
Support MariaDB development by buying support/new features from<br />
Monty Program Ab. You can contact us about this at sales@montyprogram.com.<br />
Alternatively consider joining our community based development effort:<br />
http://kb.askmonty.org/en/contributing-to-the-mariadb-project/<br />
<br />
>> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'<br />
after mysqld.service restart.</nowiki><br />
<br />
== MariaDB ==<br />
<br />
* login to DB<br />
<br />
# mysql -u root -p<br />
<br />
CREATE USER 'wp'@'localhost' IDENTIFIED BY 'somepassword';</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17224Benutzer:PMay/vServer at Hetzner2013-11-20T09:56:35Z<p>PMay: </p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0<br />
<br />
== LAMP ==<br />
# pacman -S apache php php-apache mariadb<br />
<br />
<nowiki>Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...<br />
OK<br />
Filling help tables...<br />
OK<br />
<br />
To start mysqld at boot time you have to copy<br />
support-files/mysql.server to the right place for your system<br />
<br />
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !<br />
To do so, start the server, then issue the following commands:<br />
<br />
'/usr/bin/mysqladmin' -u root password 'new-password'<br />
'/usr/bin/mysqladmin' -u root -h eniac password 'new-password'<br />
<br />
Alternatively you can run:<br />
'/usr/bin/mysql_secure_installation'<br />
<br />
which will also give you the option of removing the test<br />
databases and anonymous user created by default. This is<br />
strongly recommended for production servers.<br />
<br />
See the MariaDB Knowledgebase at http://kb.askmonty.org or the<br />
MySQL manual for more instructions.<br />
<br />
You can start the MariaDB daemon with:<br />
cd '/usr' ; /usr/bin/mysqld_safe --datadir='/var/lib/mysql'<br />
<br />
You can test the MariaDB daemon with mysql-test-run.pl<br />
cd '/usr/mysql-test' ; perl mysql-test-run.pl<br />
<br />
Please report any problems with the '/usr/scripts/mysqlbug' script!<br />
<br />
The latest information about MariaDB is available at http://mariadb.org/.<br />
You can find additional information about the MySQL part at:<br />
http://dev.mysql.com<br />
Support MariaDB development by buying support/new features from<br />
Monty Program Ab. You can contact us about this at sales@montyprogram.com.<br />
Alternatively consider joining our community based development effort:<br />
http://kb.askmonty.org/en/contributing-to-the-mariadb-project/<br />
<br />
>> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'<br />
after mysqld.service restart.</nowiki><br />
<br />
== MariaDB ==<br />
<br />
* login to DB<br />
<br />
# mysql -u root -p</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17223Benutzer:PMay/vServer at Hetzner2013-11-19T19:45:32Z<p>PMay: /* LAMP */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0<br />
<br />
== LAMP ==<br />
# pacman -S apache php php-apache mariadb<br />
<br />
<nowiki>Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...<br />
OK<br />
Filling help tables...<br />
OK<br />
<br />
To start mysqld at boot time you have to copy<br />
support-files/mysql.server to the right place for your system<br />
<br />
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !<br />
To do so, start the server, then issue the following commands:<br />
<br />
'/usr/bin/mysqladmin' -u root password 'new-password'<br />
'/usr/bin/mysqladmin' -u root -h eniac password 'new-password'<br />
<br />
Alternatively you can run:<br />
'/usr/bin/mysql_secure_installation'<br />
<br />
which will also give you the option of removing the test<br />
databases and anonymous user created by default. This is<br />
strongly recommended for production servers.<br />
<br />
See the MariaDB Knowledgebase at http://kb.askmonty.org or the<br />
MySQL manual for more instructions.<br />
<br />
You can start the MariaDB daemon with:<br />
cd '/usr' ; /usr/bin/mysqld_safe --datadir='/var/lib/mysql'<br />
<br />
You can test the MariaDB daemon with mysql-test-run.pl<br />
cd '/usr/mysql-test' ; perl mysql-test-run.pl<br />
<br />
Please report any problems with the '/usr/scripts/mysqlbug' script!<br />
<br />
The latest information about MariaDB is available at http://mariadb.org/.<br />
You can find additional information about the MySQL part at:<br />
http://dev.mysql.com<br />
Support MariaDB development by buying support/new features from<br />
Monty Program Ab. You can contact us about this at sales@montyprogram.com.<br />
Alternatively consider joining our community based development effort:<br />
http://kb.askmonty.org/en/contributing-to-the-mariadb-project/<br />
<br />
>> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'<br />
after mysqld.service restart.</nowiki></div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17222Benutzer:PMay/vServer at Hetzner2013-11-19T19:44:46Z<p>PMay: </p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0<br />
<br />
== LAMP ==<br />
# pacman -S apache php php-apache mariadb<br />
<br />
<cite><br />
Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...<br />
OK<br />
Filling help tables...<br />
OK<br />
<br />
To start mysqld at boot time you have to copy<br />
support-files/mysql.server to the right place for your system<br />
<br />
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !<br />
To do so, start the server, then issue the following commands:<br />
<br />
'/usr/bin/mysqladmin' -u root password 'new-password'<br />
'/usr/bin/mysqladmin' -u root -h eniac password 'new-password'<br />
<br />
Alternatively you can run:<br />
'/usr/bin/mysql_secure_installation'<br />
<br />
which will also give you the option of removing the test<br />
databases and anonymous user created by default. This is<br />
strongly recommended for production servers.<br />
<br />
See the MariaDB Knowledgebase at http://kb.askmonty.org or the<br />
MySQL manual for more instructions.<br />
<br />
You can start the MariaDB daemon with:<br />
cd '/usr' ; /usr/bin/mysqld_safe --datadir='/var/lib/mysql'<br />
<br />
You can test the MariaDB daemon with mysql-test-run.pl<br />
cd '/usr/mysql-test' ; perl mysql-test-run.pl<br />
<br />
Please report any problems with the '/usr/scripts/mysqlbug' script!<br />
<br />
The latest information about MariaDB is available at http://mariadb.org/.<br />
You can find additional information about the MySQL part at:<br />
http://dev.mysql.com<br />
Support MariaDB development by buying support/new features from<br />
Monty Program Ab. You can contact us about this at sales@montyprogram.com.<br />
Alternatively consider joining our community based development effort:<br />
http://kb.askmonty.org/en/contributing-to-the-mariadb-project/<br />
<br />
>> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'<br />
after mysqld.service restart.<br />
</cite></div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17221Benutzer:PMay/vServer at Hetzner2013-11-19T19:05:33Z<p>PMay: /* sshd */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it:<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17220Benutzer:PMay/vServer at Hetzner2013-11-19T19:05:19Z<p>PMay: /* sshd */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
* see also [[:en:Secure Shell]]<br />
* install openssh wih pacman<br />
* enable it<br />
<br />
# systemctl enable sshd.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17219Benutzer:PMay/vServer at Hetzner2013-11-19T19:03:31Z<p>PMay: /* network */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== sshd ==<br />
*<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17218Benutzer:PMay/vServer at Hetzner2013-11-19T19:02:02Z<p>PMay: /* network */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
* edit /etc/resolv.conf to setup name server (see same file from old debian installation for proper values)<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17217Benutzer:PMay/vServer at Hetzner2013-11-19T19:00:25Z<p>PMay: /* network */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values forIP adress and so on can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17216Benutzer:PMay/vServer at Hetzner2013-11-19T19:00:02Z<p>PMay: /* network */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* proper values can be found from old debian installation at /etc/network/interfaces<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17215Benutzer:PMay/vServer at Hetzner2013-11-19T18:58:10Z<p>PMay: /* network */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]] or [[:en:Network Configuration#Static IP address]]<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17214Benutzer:PMay/vServer at Hetzner2013-11-19T18:57:17Z<p>PMay: /* network */</p>
<hr />
<div>== network ==<br />
* also see [[:en:Network Configuration]]<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17213Benutzer:PMay/vServer at Hetzner2013-11-19T18:57:08Z<p>PMay: /* network */</p>
<hr />
<div>== network ==<br />
* also see [[en:Network Configuration]]<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17212Benutzer:PMay/vServer at Hetzner2013-11-19T18:56:53Z<p>PMay: /* network */</p>
<hr />
<div>== network ==<br />
* also see [[Network Configuration]]<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17211Benutzer:PMay/vServer at Hetzner2013-11-19T18:56:41Z<p>PMay: /* network */</p>
<hr />
<div>== network ==<br />
* also see [Network Configuration]<br />
* create and edit /etc/conf.d/network@ens3<br />
* create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17210Benutzer:PMay/vServer at Hetzner2013-11-19T18:54:23Z<p>PMay: /* network */</p>
<hr />
<div>== network ==<br />
create and edit /etc/conf.d/network@ens3<br />
create and edit /etc/systemd/system/network@.service (without ens3 after @)<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17209Benutzer:PMay/vServer at Hetzner2013-11-19T18:51:51Z<p>PMay: </p>
<hr />
<div>== network ==<br />
<br />
# systemctl enable network@ens3.service<br />
<br />
== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17208Benutzer:PMay/vServer at Hetzner2013-11-19T18:48:31Z<p>PMay: /* activate swap partition */</p>
<hr />
<div>== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1<br />
<br />
edit /etc/fstab and add this line at bottom<br />
/dev/sda1 none swap defaults 0 0</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/vServer_at_Hetzner&diff=17207Benutzer:PMay/vServer at Hetzner2013-11-19T18:45:24Z<p>PMay: Die Seite wurde neu angelegt: „== activate swap partition == # mkswap /dev/sda1 # swapon /dev/sda1“</p>
<hr />
<div>== activate swap partition ==<br />
# mkswap /dev/sda1<br />
# swapon /dev/sda1</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay&diff=17206Benutzer:PMay2013-11-19T18:43:21Z<p>PMay: /* Unterseiten */</p>
<hr />
<div>== [[/Lesezeichen|Lesezeichen]] ==<br />
{{/Lesezeichen}}<br />
<br />
== Unterseiten ==<br />
* [[/Konfiguration]]<br />
* [[/Installierte Pakete]]<br />
* [[/PKGBUILD]]<br />
* [[/T430s Setup]]<br />
* [[/vServer at Hetzner]]<br />
* [[/T430s Setup alt]]<br />
* [[/MPlayer]]<br />
* [[/Regionalcode (region code) von DVD Laufwerken setzen]]<br />
* [[/rubyripper]]<br />
<br />
== Fertige Eigene Seiten ==<br />
* [[Garmin GPS mit QLandkarte GT]] -> eventuelle Kategorien anders strukturieren<br />
* [[Drucken mit Canon MX (PIXMA, 850, etc.)]] -> eventuelle Kategorien anders strukturieren<br />
<br />
== [[/Bilder-Galerie|Bilder-Galerie]] ==<br />
{{/Bilder-Galerie}}<br />
<br />
== Löschen ==<br />
* [[/Garmin GPS]]<br />
* [[T430s Setup]]<br />
* [[/Garmin GPS mit QLandkarte GT]]<br />
* [[/Drucken mit Canon MX (850, etc.)]]<br />
* [[Benutzer:Drucken mit Canon MX (PIXMA, 850, etc.)]]<br />
* [[/Pacman]]<br />
* [[/GNOME config]]</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17205Benutzer:PMay/T430s Setup2013-11-18T13:38:27Z<p>PMay: /* Config */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
# Festplatte partitionieren<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
# Filesystem anlegen<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
<br />
# mounten<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
#Mirror auswählen<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
# Anpassungen sollte nicht notwendig sein wenn man nicht mit Verschüsselung arbeitet<br />
# eventuell erste Zeile trotzdem rein, aber an hooks nichts ändern<br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
* create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
# nicht notwendig wenn man ohne dateisystemverschlüsselung arbeitet<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
* Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@interface_name.service<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17204Benutzer:PMay/T430s Setup2013-11-18T13:38:08Z<p>PMay: /* Config */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
# Festplatte partitionieren<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
# Filesystem anlegen<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
<br />
# mounten<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
#Mirror auswählen<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
# Anpassungen sollte nicht notwendig sein wenn man nicht mit Verschüsselung arbeitet<br />
# eventuell erste Zeile trotzdem rein, aber an hooks nichts ändern<br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
* create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
# nicht notwendig wenn man ohne dateisystemverschlüsselung arbeitet<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
** Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@interface_name.service<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17203Benutzer:PMay/T430s Setup2013-11-18T13:37:47Z<p>PMay: /* Config */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
# Festplatte partitionieren<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
# Filesystem anlegen<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
<br />
# mounten<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
#Mirror auswählen<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
# Anpassungen sollte nicht notwendig sein wenn man nicht mit Verschüsselung arbeitet. eventuell erste Zeile trotzdem rein, aber an hooks nichts ändern<br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
* create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
# nicht notwendig wenn man ohne dateisystemverschlüsselung arbeitet<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
** Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@interface_name.service<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17202Benutzer:PMay/T430s Setup2013-11-18T13:36:39Z<p>PMay: /* Config */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
# Festplatte partitionieren<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
# Filesystem anlegen<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
<br />
# mounten<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
#Mirror auswählen<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
* create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
# nicht notwendig wenn man ohne dateisystemverschlüsselung arbeitet<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
** Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@interface_name.service<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17201Benutzer:PMay/T430s Setup2013-11-18T13:35:08Z<p>PMay: /* Config */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
# Festplatte partitionieren<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
# Filesystem anlegen<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
<br />
# mounten<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
#Mirror auswählen<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
* create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. <br />
** Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
** Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@interface_name.service<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17200Benutzer:PMay/T430s Setup2013-11-18T13:33:30Z<p>PMay: /* Festplatte */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
# Festplatte partitionieren<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
# Filesystem anlegen<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
<br />
# mounten<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
#Mirror auswählen<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
** create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. <br />
** Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
** Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@interface_name.service<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17199Benutzer:PMay/T430s Setup2013-11-18T13:32:30Z<p>PMay: /* Festplatte */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
# Festplatte partitionieren<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
#Mirror auswählen<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
** create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. <br />
** Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
** Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@interface_name.service<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17198Benutzer:PMay/T430s Setup2013-11-18T13:32:07Z<p>PMay: /* Boot-Strap */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
#Mirror auswählen<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
** create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. <br />
** Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
** Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@interface_name.service<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17197Benutzer:PMay/T430s Setup2013-11-18T13:31:10Z<p>PMay: /* Tastatur */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
** create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. <br />
** Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
** Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@interface_name.service<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMayhttps://wiki.archlinux.de/index.php?title=Benutzer:PMay/T430s_Setup&diff=17196Benutzer:PMay/T430s Setup2013-11-18T09:51:41Z<p>PMay: /* Gnome (oder Xfce [siehe unten]) */</p>
<hr />
<div>== BIOS Settings ==<br />
* Zeit auf lokale Zeit minus 2 Stunden<br />
* Fn und Strg tauschen<br />
* beide Virtualisierungsoptionen an -> wegen VirtualBox<br />
<br />
== Booten und Netzwerk prüfen ==<br />
* vor dem Booten Ethernet-Kabel anschließen<br />
* nach dem Booten etwas warten und dann Netzwerkzugriff prüfen<br />
ping heise.de<br />
<br />
== Tastatur ==<br />
* loadkeys de-latin1-nodeadkeys<br />
<br />
== Festplatte ==<br />
fdisk /dev/sda<br />
<br />
* +100M für /boot (/dev/sda1)<br />
* +13G für Swap (/dev/sda2)<br />
* Rest für / (/dev/sda3)<br />
* Partitionstyp anpassen (code 82 für Swap, 83 (Default) für Linux)<br />
<br />
mkfs.ext4 /dev/sda1<br />
mkfs.ext4 /dev/sda3<br />
mkswap /dev/sda2<br />
swapon /dev/sda2<br />
mount /dev/sda3 /mnt<br />
mkdir /mnt/boot <br />
mount /dev/sda1 /mnt/boot<br />
<br />
== Boot-Strap ==<br />
nano /etc/pacman.d/mirrorlist<br />
<br />
pacstrap /mnt base<br />
pacstrap /mnt base-devel<br />
pacstrap /mnt syslinux<br />
<br />
== Config ==<br />
genfstab -p /mnt >> /mnt/etc/fstab<br />
<br />
* /mnt/etc/fstab prüfen<br />
* Only the root (/) partition needs 1 for the last field. Everything else should have either 2 or 0 (see fstab#Field definitions). <br />
<br />
arch-chroot /mnt<br />
<br />
* Write your hostname to /etc/hostname.<br />
* Symlink /etc/localtime to /usr/share/zoneinfo/Zone/SubZone. Replace Zone and Subzone to your liking. For example: <br />
ln -s /usr/share/zoneinfo/Europe/Berlin /etc/localtime<br />
* Set locale preferences in /etc/locale.conf.<br />
# siehe auch: http://www.gentoo.org/doc/en/guide-localization.xml#doc_chap3<br />
LANG="en_US.UTF-8"<br />
LC_TIME="de_DE.UTF-8"<br />
* Uncomment the selected locale in /etc/locale.gen and generate it with locale-gen.<br />
* Configure /etc/mkinitcpio.conf as needed (see mkinitcpio) and create an initial RAM disk with: <br />
MODULES="ext4"<br />
HOOKS="base udev autodetect pata scsi sata usb encrypt filesystems usbinput fsck"<br />
** create<br />
mkinitcpio -p linux<br />
* Configure the bootloader: refer back to the appropriate article from the bootloader installation section. <br />
** Konfigurationsdatei /boot/syslinux/syslinux.cfg ist selbsterklärend<br />
APPEND cryptdevice=/dev/sda2:cryptroot root=/dev/mapper/cryptroot ro<br />
** Install Syslinux<br />
syslinux-install_update -i -a -m<br />
* Set a root password with passwd.<br />
<br />
== Mehr ==<br />
* /etc/hosts (Note: There is no need to edit /etc/hosts. https://wiki.archlinux.org/index.php/Beginners%27_Guide)<br />
* /etc/vconsole.conf<br />
KEYMAP=de-latin1-nodeadkeys<br />
<br />
== Neustart ==<br />
* type exit or press Ctrl+D<br />
* unmount<br />
umount /mnt/boot<br />
umount /mnt<br />
* Neustart<br />
reboot<br />
<br />
== Netzwerk nach Neustart wieder aktivieren ==<br />
systemctl start dhcpcd@interface_name.service<br />
<br />
# zum Beispiel<br />
systemctl start dhcpcd@eth0.service<br />
<br />
* siehe auch https://wiki.archlinux.org/index.php/Network_Configuration#Run_DHCP_at_boot<br />
* You can use the command ip link to discover the names of your interfaces. --> enp0s25<br />
<br />
== Adduser ==<br />
* add a user: https://wiki.archlinux.org/index.php/Users_and_Groups#User_management<br />
<br />
== Gnome (oder Xfce [siehe unten]) ==<br />
* install xorg: https://wiki.archlinux.org/index.php/Xorg (pacman -S xorg-server)<br />
* install GNOME: https://wiki.archlinux.org/index.php/Gnome (pacman -S gnome)<br />
* Grafiktreiber installieren (zum Beispiel "pacman -S xf86-video-intel" für Intel)<br />
** https://wiki.archlinux.org/index.php/Xorg#Driver_installation<br />
* -> ist schon mit gnome da: -pacman -S gdm<br />
* -> alt -- in /etc/rc.conf unter DEAMONS dbus einfügen vor network<br />
* -> alt -- 2 Stellen in /etc/inittab bearbeiten (Kommentare ändern)<br />
* zum Start siehe https://wiki.archlinux.org/index.php/Gdm#GDM_as_the_default_greeter (systemctl enable gdm.service)<br />
* pacman -S xf86-input-synaptics<br />
* -> ist schon mit gnome da: https://wiki.archlinux.org/index.php/NetworkManager#GNOME<br />
<br />
== Xfce (oder Gnome [siehe oben]) ==<br />
* https://wiki.archlinux.org/index.php/Xorg<br />
* https://wiki.archlinux.org/index.php/Xfce<br />
* https://wiki.archlinux.org/index.php/SLiM<br />
* pacman -S xf86-video-intel<br />
* pacman -S xf86-input-synaptics<br />
<br />
== systemd ==<br />
* https://wiki.archlinux.org/index.php/Systemd#Basic_systemctl_usage<br />
* https://wiki.archlinux.org/index.php/Systemd#Running_DMs_under_systemd<br />
<br />
# entweder dieses für gnome<br />
systemctl enable gdm.service<br />
# oder dieses für xfce<br />
systemctl enable slim.service<br />
# und<br />
systemctl enable NetworkManager<br />
<br />
== etc. ==<br />
* https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen#X.org<br />
<br />
== MEI ausschalten (vermutlich nichtmehr notwendig) ==<br />
Da es beim Booten zu einer Race Condition beim laden zweier Watchdogs kommt<br />
* bearbeite /etc/modprobe.d/blacklist.conf<br />
blacklist mei<br />
* siehe auch<br />
** https://bbs.archlinux.de/viewtopic.php?id=21812<br />
** http://cateee.net/lkddb/web-lkddb/INTEL_MEI.html<br />
** http://ubuntuforums.org/showthread.php?t=1970325<br />
** https://bbs.archlinux.org/viewtopic.php?id=133083</div>PMay